(Advertisements are not shown for registered users)

CRX louvers

Anything goes, as long as it follows the Community Rules.

Moderator: Moderators

CRX louvers

Postby rodriguez_88 » Fri Dec 19, 2008 6:25 pm

I need to know why it is that not many rex's have these on them...I saw it on a rare occasion on one and i want it...any ideas what the price on them is and where to find one? are they universal?
Image
Last edited by rodriguez_88 on Fri Dec 19, 2008 6:32 pm, edited 1 time in total.
User avatar
rodriguez_88
 
Posts: 40
Joined: Mon Dec 15, 2008 4:25 pm
Location: Los Angeles

Postby ollie » Fri Dec 19, 2008 6:29 pm

Those look like louvers not a spoiler from your pic..
If your talking about the louvers I think theres a few members here that have them...I'm sure they'll chime in when they see this..
Last edited by ollie on Fri Dec 19, 2008 6:51 pm, edited 1 time in total.
...Thrashy. said...."Robb, if my car ever breaks down, I'll never have to worry because I can just shout "CRX FLOORMATS!" and within an hour you'll be right there to tell me about yours. 8)" ahhhhhahahahahahah

1989 EF9 project "Backburner" in restoration. :)
User avatar
ollie
Site Admin
 
Posts: 4668
Joined: Sun Feb 27, 2005 9:28 pm
Location: Detroit,Michigan

Postby CeRXese » Fri Dec 19, 2008 6:49 pm

ummm.........why??
92 civic cx, sold crx.
User avatar
CeRXese
 
Posts: 278
Joined: Wed Jul 02, 2008 1:05 pm
Location: SoCalifornia

Postby justinw » Fri Dec 19, 2008 6:51 pm

There was some on ebay a little while ago. You prob don't see them much because they aren't that attractive :lol:
Silver 87 CRX hf - vandalized
Flint black 91 CRX Si - wrecked/sold
Flint black 90 CRX Si - sold
2012 VW GTI - sold
2014 Subaru Outback 2.5i
User avatar
justinw
 
Posts: 2587
Joined: Sun Sep 21, 2008 6:09 pm
Location: Wilmington, NC

Postby LowFlyin » Fri Dec 19, 2008 6:54 pm

CeRXese wrote:ummm.........why??
Because, back when these cars were new, tint for windows wasn't invented/marketed yet.
Chris @ DeatschWerks
1991 CRX SiR
1991 Civic Si
1991 Civic Wagon RT4WD
2014 Fiesta ST
User avatar
LowFlyin
 
Posts: 936
Joined: Thu May 17, 2007 11:03 am
Location: Oklahoma City

Postby CeRXese » Fri Dec 19, 2008 7:03 pm

i can understand that but i never understood why people still use them, i haven't seen one that looks good in a crx.
92 civic cx, sold crx.
User avatar
CeRXese
 
Posts: 278
Joined: Wed Jul 02, 2008 1:05 pm
Location: SoCalifornia

Postby Ti Rider » Fri Dec 19, 2008 7:06 pm

I have set in my shed. They were on the car when I bought it. Believe it or not they really cut down on interior heat. They aren't for sale.
'89 Blade Silver CRX Si
Member #17
User avatar
Ti Rider
 
Posts: 1207
Joined: Sat Mar 05, 2005 7:22 pm
Location: My couch

Postby CeRXese » Fri Dec 19, 2008 7:10 pm

i'm looking at them in an exterior looking point of view, i'm not arguing that they aren't useful just fugly thats all.
92 civic cx, sold crx.
User avatar
CeRXese
 
Posts: 278
Joined: Wed Jul 02, 2008 1:05 pm
Location: SoCalifornia

Postby scoop » Fri Dec 19, 2008 7:22 pm

The attractiveness factor is subjective, I for one like them... why? because they remind me of the 70's.... when I was a kid and loved hotwheels and mad max movies and muscle cars with window louvre's.

Im looking for a clean set myself... its the last exterior piece I want.

Ive heard some folk say it impacts mpg, but ive talked to someone that had a set and they say you can't notice them at all. And if you look at the profile of the crx, aerodynamically the louvre's are out of the zone of influence.
User avatar
scoop
 
Posts: 1265
Joined: Sat Mar 29, 2008 8:42 pm
Location: Santa Cruz, California

Postby CeRXese » Fri Dec 19, 2008 7:37 pm

Image

its an acquired taste IMO
92 civic cx, sold crx.
User avatar
CeRXese
 
Posts: 278
Joined: Wed Jul 02, 2008 1:05 pm
Location: SoCalifornia

Postby windraver » Fri Dec 19, 2008 8:59 pm

I have it for my first gen. I used it originally since I didn't have window tints and dislike the out visibility of my cargo. Once I put on tints though I took it off since I found my car looked better without it. In any case, If I was trying to lower the heat and sunlight in my car, they'd work great.

some ugly pictures of my rex
Image

a better picture without it:
Image

it might be that ugly mugen ripoff that made it look bad... Its next to my car in the garage so maybe i'll try it on again.
I just noticed I'm never playing by the rules
Wind's Pop-up Headlights
User avatar
windraver
 
Posts: 1709
Joined: Sun Apr 20, 2008 6:46 am
Location: San Jose, CA

Postby Thrashy » Fri Dec 19, 2008 9:47 pm

Personally I think it looks freaking awesome on first-gens. Something about the boxier proportions. The one made for the 88-91's is just too bulky. It screws up the lines of the rear.
1991 DX
My name: there's two H's, dammit!
User avatar
Thrashy
 
Posts: 817
Joined: Fri Jun 06, 2008 4:47 pm
Location: Kansas City

Postby xMATTx » Sat Dec 20, 2008 2:37 am

As far as i know Majestic Honda, roughly 130ish brand new. I havent checked in awhile but they had them a few months ago.
And I love louvers, i'd bring them back so quick if i had the extra money to scoop two sets up.
1990 crx si - B20Vtec Project
1993 Civic DX Hatch - Daily.
xMATTx
 
Posts: 283
Joined: Wed Feb 20, 2008 3:50 pm
Location: Satellite Beach, FL

Re: CRX louvers

Postby Baker » Sat Dec 20, 2008 2:50 am

rodriguez_88 wrote:I need to know why it is that not many rex's have these on them.


They were an option that not everyone wanted.

rodriguez_88 wrote:are they universal?


No, ones for an '85 Camaro will not fit your Crx. :lol:

Pretty certain that they are model and year specific.
Meaning that ones for an 88-91 will not fit 84-87.
User avatar
Baker
Mr. Search
 
Posts: 20301
Joined: Sat Aug 12, 2006 8:48 am
Location: Fingerlakes Region of Upstate NY

Postby CRREX » Sat Dec 20, 2008 3:58 am

I was just checking around and i found these,

http://spoilers4less.com/crx1.html

first gen and second gen looks like
I dont how good they are being after market and all
300$ too...
87 CRX Si.
D16 with ITB's.
The Other Rex Meat.
User avatar
CRREX
 
Posts: 254
Joined: Fri Dec 12, 2008 5:41 pm
Location: Alaska

Postby windraver » Sat Dec 20, 2008 4:38 am

Send them a message and have them send you a picture. You should hopefully get service for that cost. They might be better than the OEM ones if they aren't so big and as long as they're not held together by something similar to window sealant... >.>;;; thats how my OEM one was held together..

So is the 2nd gen crx hatch and a mazda the same thing? hahaha... online stores -.-
I just noticed I'm never playing by the rules
Wind's Pop-up Headlights
User avatar
windraver
 
Posts: 1709
Joined: Sun Apr 20, 2008 6:46 am
Location: San Jose, CA

Postby inthewoods » Sat Dec 20, 2008 4:54 am

LowFlyin' wrote:Because, back when these cars were new, tint for windows wasn't invented/marketed yet.

How old are you?? I had a car tinted at a tint shop back in '89 :rolleyes1:
User avatar
inthewoods
 
Posts: 3638
Joined: Thu May 22, 2008 1:33 pm
Location: Carson, WA

Postby windraver » Sat Dec 20, 2008 5:00 am

inthewoods wrote:
LowFlyin' wrote:Because, back when these cars were new, tint for windows wasn't invented/marketed yet.

How old are you?? I had a car tinted at a tint shop back in '89 :rolleyes1:

I think my dad tried to tint his car years before 1986 then too... so the material was available... haha.. i also know it was a disaster... i guess i got my mom's genes in that case ^.^;
User avatar
windraver
 
Posts: 1709
Joined: Sun Apr 20, 2008 6:46 am
Location: San Jose, CA

Postby no_rex4u » Sat Dec 20, 2008 9:00 am

i posted a link on where to get them in the previous thread about louvres,

the website offered both ABS plastic and ALuminum
90 CRX SI from canada
rota flashbacks


"Just put a SOHC in it, and shut up"
no_rex4u
 
Posts: 1437
Joined: Wed Jan 30, 2008 4:44 pm
Location: annapolis, MD

Postby downest » Sat Dec 20, 2008 9:46 am

Image
Tom Downes
'91 CRX Si B18C5 turbo toy
'88 3.4Runner daily driver/trail rig
Wicked Performance Group
User avatar
downest
Wicked Tom
 
Posts: 9987
Joined: Mon Jan 23, 2006 1:07 am
Location: Manchester, NH

Postby Krix » Sat Dec 20, 2008 9:58 am

Hmm...with the tag on that camaro I think it must belong to Tom :lol:
User avatar
Krix
 
Posts: 5350
Joined: Mon Mar 07, 2005 7:43 am
Location: Salem, VA

Postby downest » Sat Dec 20, 2008 9:59 am

Just lucky google image search :P
Tom Downes
'91 CRX Si B18C5 turbo toy
'88 3.4Runner daily driver/trail rig
Wicked Performance Group
User avatar
downest
Wicked Tom
 
Posts: 9987
Joined: Mon Jan 23, 2006 1:07 am
Location: Manchester, NH

Postby Fuel shy » Sat Dec 20, 2008 10:37 am

Thrashy wrote:Personally I think it looks freaking awesome on first-gens. Something about the boxier proportions. The one made for the 88-91's is just too bulky. It screws up the lines of the rear.

I agree they look much better on the first gen... but they look even better on older American muscle. I would say I like louvers, but the car has to be right... and the 2nd gen is not right for louvers, imo.
Fuel Fiend 88 CRX Si Y49 - SOLD
User avatar
Fuel shy
 
Posts: 753
Joined: Tue Oct 31, 2006 6:29 pm
Location: Oakland, CA

Postby Flamegurl » Sat Dec 20, 2008 4:03 pm

LowFlyin' wrote:Because, back when these cars were new, tint for windows wasn't invented/marketed yet.


All crx's come with slighty tinted glass..... so if it wasn't invented... how did they deliver new crx's? In Japan they could PICK between normal tint and bronzed!
User avatar
Flamegurl
 
Posts: 390
Joined: Fri Apr 14, 2006 10:46 am
Location: Waterloo, ON

Postby cleanpigpen » Sat Dec 20, 2008 4:05 pm

Tom, you really hate my first car don't you... mine wasn't nearly as nice though
User Feedback
I talk to my... car. Sometimes nice, sometimes harsh, depends what department the car needs motivation in.
Kenton
User avatar
cleanpigpen
 
Posts: 3278
Joined: Sun Sep 02, 2007 2:38 pm
Location: New Carlisle, OH

Next

Return to The Lounge

Who is online

Users browsing this forum: Bing [Bot], Yahoo [Bot] and 0 guests