Honda CRX Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
6,567 Posts
you dont really need a press to replace the upper all joints.....its just easier with one. of course that only applies if you have a 90/91 as you do.

if you are doing the balljoint style clip, just take off the circlip thing that holds the kjoint in, then put a socket on the balljoint and beat it out with a hammer. clean it up and the new one will tap right in.

[email protected]
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top