Honda CRX Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
1,463 Posts
Discussion Starter · #1 ·
I have both of them almost all the way off but at the top (near the top of the window) theres 2 star shapped bolts i have the socket but i cant get them lose and i dont know how there attached. plz help so i can finsih the interior today.
 

·
Registered
Joined
·
9,844 Posts
They are torx head bolts. Make sure the torx bit fits really snug, and then attach it to either a ratchet with a pipe, or a breaker bar. They just unscrew, but are torqued down pretty tight.
 

·
Registered
Joined
·
1,463 Posts
Discussion Starter · #4 ·
i had a electric drill and i put that star bit in and it wouldnt move so i just stopped. And i have rachet but the socket is to small.
 

·
Registered
Joined
·
3,695 Posts
That electric drill isn't going to have enough torque to pop those babies loose. If the socket drive size is too small, and you have a bigger rachet, I'd go out and buy a larger drive torx socket and it should do the trick.
 

·
Registered
Joined
·
1,463 Posts
Discussion Starter · #6 ·
Ya i probably will do that but things were going really fast when i had some1 helping (friends) because it wasnt boring i had some1 to talk 2. But it seems like every1 is some how busy now. So i tried working by myself but its really boring. So ill start to do more when some1 comes over.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top