Honda CRX Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
52 Posts
Discussion Starter · #1 ·
just to give my turbo some more room, and cooling capacity-what goes into the 92-95 radiator install in a 90-91 Si? ie, civic hoses or other, fal fan, etc, what modifications/fabrication should I be aware of?
thanks,
n
 

·
Registered
Joined
·
1,959 Posts
I agree..... this would be good info to know.. . . .if anyone has done it and wants to do a writeup...

Part numbers for hodes building brackets getting in in nice and clean looking...... all good stuff..
 

·
Premium Member
Joined
·
4,512 Posts
I run a 92-95 style radiator in my boosted setup.
As far as the hoses I used a 88-91 style lower and a 92-95 upper.
They do fit,but I had to wiggle the hoses on the radiator(tight fit).

That wasnt the involved part!
Some people just use the ghetto method and tilt the radiator back,but I didnt want to do that so I had to cut a little and make some lower radiator mounts.
I did this with aluminum stock.
As far as a cooling fan I used a FAL slimline.(No cooling problems to date)
Heres a few pics to help ya out.


 

·
Registered
Joined
·
1,959 Posts
Thanks Ollie. That certainly clears it all up...... just make 2 nice plates for the bottom and use the proper hoses and all is well....

Coolness.. .

Chris
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top