Honda CRX Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
9,754 Posts
The wobbling is because you have it mounted 180 degrees off the cam. The groove and notch thing is slightly off-center, so it can only sit flush one way. When you crank the engine and it's not in right you will notice the distributor moving, and of course it won't sit flush against the side of the head.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top