Honda CRX Forum banner

B16a Mains ft/lbs?

1801 Views 7 Replies 4 Participants Last post by  jfish360
Whats the ft/lbs on the stock mains?
1 - 2 of 8 Posts
honda service manual for 94 gsr b18c1 states:

main bearing cap bolts. 56 ft. lbs
apply engine oil to the bolt threads and washer.
note: after torquing bolts turn crankshaft to check for binding

the gsr motor as a bearing cap bridge and the bolts that hold that down are torqued to 49 ft lbs

im assuming that the torque spec would be the same or simmilar
hope that helps but i dont have a manual for the b16

that should be a problem.

1 - 2 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.