Honda CRX Forum banner

Brake booster help

1861 Views 8 Replies 4 Participants Last post by  CRXBart
Hey how do i get the brake booster off. I have never tried and i want to get it in my head before i jump under the hood. I am finishing my rear disk conversion so if any of you have any suggestions on getting the bolts on the porportioning valve and master cylinder off ill take them.
1 - 9 of 9 Posts
The nuts that hold the booster also hold the pedal assembly under the dash (PITA). Use a flare nut wrench for the brake lines to avoid stripping them.
How many bolts is it and am i correct in assuming that its not to complicated. By the way thanks for the reply.
It's four nuts, 12mm I believe.
Thanks alot. I appreciate it.
Take pics if you can. Let us know how this goes. I might be doing mine soon.
Ill do a step by step as long as i do it in the light. I'll let you know.
wardcrx said:
Ill do a step by step as long as i do it in the light. I'll let you know.
Thanks. :D
It's real easy they are just hard to get to. Lots of extensions, and flex joints are your friends.
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top