Honda CRX Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,960 Posts
If you can not find them at all... i have some off of my 88 si parts car that i can strip off and mail to you . . .
throw a buck or 2 for shipping and ill get them off this weekend . . .

Chris

yeah. . 1 bolt and there off there... .the big ones only need to come off to change the rotor out for maching or replacement ( which you should be doing anyway)
 

·
Registered
Joined
·
1,960 Posts
Although it is not necessary to bleed the brakes it might not be a bed idea whil you are in there.... spray the bleeders up and let them soak with a good penetrant.. usually though the rule is ... if you do not see fluid doing whatever you are doing then you do not need to bleed..

pressing the petal will throw the piston the wrong way... usa a brake tool or an old pad and a c clamp. turning slowly with hand pressure only. .
good luck

Chris
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top