Honda CRX Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
293 Posts
NCRXSi said:
Thanks for the replies guys. Luckily I've got my set of roll pin punches and recently removed it when I did the swap so the bitch pin hopefully won't give me to much trouble.

But after having a difficult time getting the left side axle seal to stop leaking, (thanks Mike for the tip on the correct seal!!) now this seal started dripping.
well if you know for sure that the new leak is coming from the shift arm. that #2 on that diagram wont help you...that #2 looks like just the boot. the boot wont stop the leak.. there should be a seal in there to keep the fluid in. i have never sean one of those leak before.

im not sure which way that seal comes out either . but i am just about to rip a d tranny apart ill take a look at it...

scarponze
 

·
Registered
Joined
·
293 Posts
after taking a look at it the seal that you need should come iwth that boot #2 in that image. its pretty simple to change.. take out the bitch pin. take the boot off. and then there is a lip that the boot hooked to. that is the seal just tap it out with a screw driver and put the new one in.

its pretty strait forward..

scarponze
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top