Honda CRX Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
9,754 Posts
Yes it will work. If you want VTEC, you need to remove the oil jet between cylinders 2 and 3. You also need pistons with reliefs for 4 valves each, which you probably already have since you're running an A6 head. Yes, you need a new headgasket, and timing belt. You might as well replace the water pump too. Get a Y8 or Z6 metal headgasket... like this one. You can use an RPM switch to activate VTEC, but there are other, better ways to do it, probably the best is to use a P28 ECU and harness (convert to OBD1).
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top