Honda CRX Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
20,386 Posts
Discussion Starter · #1 ·
I realize this has been done before, but looking for a non BS answer from ppl who have actually done this.

How hard is it to shoe horn Del Sol seats into a 88-91 Crx?
How do the mount holes lineup?
How do they sit, too low for the driver, too high?
Is it worth it to drill another mount hole to make it fit? :?:
 

·
Registered
Joined
·
1,705 Posts
Most people that do this weld a set of CRX seat rails onto the new donor seats and just mount them right into the car. You may need to make modifications depending on the height and positioning of the new seats.
 

·
Registered
Joined
·
9,746 Posts
A friend of mine got them into his EF hatch using a combination of the Sol seat rails and some EG rails, they got all but the front outer hole to line up right, and they welded a bracket for that one. It will sit a little closer to the wheel and the bottom part will have a more aggressive lean, so it actually feels really sporty, it's great for AutoX. I'm pretty sure you can just swap pans as well, as stef about that, he's a pro at pan swaps.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top