Honda CRX Forum banner
1 - 20 of 21 Posts

·
Registered
Joined
·
2,297 Posts
Discussion Starter · #1 ·
I just won these:


I was wondering if anyone else has installed them just below the radio or if anyone has seen a write up about how to install them flush so they don't look like crap?

If there's no write up on these, I'll do a step by step with pics as I install them.
 

·
Registered
Joined
·
2,297 Posts
Discussion Starter · #3 ·
I've seen them in the CRX before, I just don't recall where.

Yes, it's a bit bigger than the small cut out, so I'll be dremeling a bit to get it to fit. As for stability, I'll probably have to fab something in the rear to stabalize it, much like with the back strap on the head unit.
 

·
Registered
Joined
·
2,297 Posts
Discussion Starter · #7 ·
Wow, that's VERY nice! Got a write up or pics on how the install went?

Ok, I'm hooked. lol. I jsut ebay'd some DC2 carbon fiber cup holders. lol.

I'll have to repost the Taurus ones I guess. I really like how nice the Integra unit matches up. I never use the ashtray or lighter, so having the cupholders down lower sould be great.

Does a 20oz bottle fit? Does it interfere with shifting at all?
 

·
Registered
Joined
·
5,051 Posts
20oz plastic coke bottle wont fit. 16oz al can is perfect.

you trim the pointy corners to fit. i literally duct taped it on. use your imagination.

i cant say what normal clearance is. i have no problem, but i have an acid beaver special shift lever (rewelded and customized from stock).

btw, it wasnt my idea. someone on honda tech showed it first.
 

·
Registered
Joined
·
2,297 Posts
Discussion Starter · #11 ·
SETI20 said:
Wasn't james supposed to sell us some of those nifty ashtray replacement cupholders?

Are you holding out on us James!? I know you're out there somewhere!!!
Never count on others to do for you what you can do yourself. Then you wont be disapointed. hehe.
 

·
Registered
Joined
·
4,384 Posts
mithuth said:
SETI20 said:
Wasn't james supposed to sell us some of those nifty ashtray replacement cupholders?

Are you holding out on us James!? I know you're out there somewhere!!!
Never count on others to do for you what you can do yourself. Then you wont be disapointed. hehe.
Wanna lend me your cnc machine for a bit? :rolleyes1:
 

·
Registered
Joined
·
2,297 Posts
Discussion Starter · #16 ·
SETI20 said:
mithuth said:
SETI20 said:
Wasn't james supposed to sell us some of those nifty ashtray replacement cupholders?

Are you holding out on us James!? I know you're out there somewhere!!!
Never count on others to do for you what you can do yourself. Then you wont be disapointed. hehe.
Wanna lend me your cnc machine for a bit? :rolleyes1:
I never claimed to have a cnc machine, unless you're refering to James.
 

·
Registered
Joined
·
494 Posts
In my beater, I just took two pieces of exhaust, welded them to a straight piece of steel, and wedged it between the seats so that there is an exhaust piece on each side of the Ebrake lever. Simple, cheap, and effective. I'll post pics when I get a chance. It's snowin like a mutha out there right now!!!
 

·
Registered
Joined
·
2,297 Posts
Discussion Starter · #20 ·
baker423 said:
tyson said:
(pic ommited in quote)
NICE and looks very stock!

I used Taurus cup holders in my '93 hatch for a little bit. They fit perfectly where the radio used to be.
Not sure how they would fit or look in a Crx, but seems the Integra ones would look much better!
I got a bit zealous and ordered a taurus cupholder AND a integra cupholder ... lol.

never ebay drunk!
 
1 - 20 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top