Joined
·
2,168 Posts
back from the deadddddddddddddddddddd
Posts by importcustomx
1 - 4 of 4 Posts
Joined
·
2,168 Posts
that doesnt sound safe..i thought you only have 10 degrees of play from the top of your shoulders..like this
![]()
![]()
other than that your going to have a real issue with spinal injuries in a roll or pretty bad accident. Just going by what ive been told.
Simpson racing is also a very well known name
from there website
"
Anchor shoulder straps at point zero to 10 degrees below the top of the shoulder. Note: Preferred mount is as close to shoulder as possible.
Shoulder Harness Adjusters should be located in line with the bottom of the sternum (lower chest area).
During adjustment of the belts, make sure that webbing enters and exits straight and in-line with all adjusters and mounting hardware.
"
go here for more awesome info on mouting etc
http://simpsonraceproducts.com/safety-r ... -brackets/
other than that your going to have a real issue with spinal injuries in a roll or pretty bad accident. Just going by what ive been told.
Simpson racing is also a very well known name
from there website
"
Anchor shoulder straps at point zero to 10 degrees below the top of the shoulder. Note: Preferred mount is as close to shoulder as possible.
Shoulder Harness Adjusters should be located in line with the bottom of the sternum (lower chest area).
During adjustment of the belts, make sure that webbing enters and exits straight and in-line with all adjusters and mounting hardware.
"
go here for more awesome info on mouting etc
http://simpsonraceproducts.com/safety-r ... -brackets/
Joined
·
2,168 Posts
Is Anyone using a harness bar right now...the ones off ebay look very tempting
Joined
·
2,168 Posts
dam you!
1 - 4 of 4 Posts
Join the discussion
