Honda CRX Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
88 Posts
Discussion Starter · #1 ·
I just swapped in a b18a on my CRX but now I have the "Check Engine" light on. i checked the code and it is getting a code 9 (1Cyl. position). How do I fix this?

Thanks!
 

·
Registered
Joined
·
9,746 Posts
If you had to rewire the dizzy (or someone else did) there is probably a wiring issue. Even wiring the two wires for that sensor backwards could throw a code (I've tried it). You could just have a bad distributor as well, try another and see how it works.
 

·
Registered
Joined
·
779 Posts
Well he said it was an Si, so no wiring is needed if kept OBD0. Try using a spare B18 OBD0 dizzy to double check. Usually when you get that code it's a dying dizzy. Similar problem with my friends Teg, he was throwing code 4. A new dizzy fixed her right up.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top