Honda CRX Forum banner
1 - 16 of 16 Posts

·
Registered
Joined
·
779 Posts
Discussion Starter · #1 ·
Mods, move this if need be. I'm just trying to spread the word.

Well, last saturday I went a local yard I never went too for a D series bracket for the swap I did this weekend, and to my surprise I found 2, yes 2, CRXs. Ones a 90-91, mostly all togheter, even the seats were still in there. The other is a 88-89, it's in the middle of a huge pile of vans, and it's 100% untouched (hoods not even popped). The tailights on BOTH crx are fully intact and appeared to be in good order.

Most of the 90-91 interior was untouched, and clean. The 88-89 is a DX, and 90-91 is an Si. I figured if anyone wanted some odd parts that I could go look for them. I think I'll pick up the 90-91 tails for myself, they looked so minty fresh. The Si sun roof was 100% surface rust, so don't ask for the skin.

If anyone would like any parts, let me know. I go to the yards on a pretty regular basis in the summer. There is also a 90-93 Teg for you B series guys missing some parts. Also, a huge collection of Si hatchs for anyone looking for MPFI stuff.

All I ask is pay for shipping and the cost of the parts.
 

·
Registered
Joined
·
779 Posts
Discussion Starter · #3 ·
I will see if I can pull it and if it's good condition. I should mention both cars are red. Both look like faded OEM paint aswell.
 

·
Registered
Joined
·
952 Posts
hows the driver side door panel on the si? I need one with no seat belt tears.
 

·
Registered
Joined
·
2,297 Posts
Oh yeah baby! Count me in for a passenger side fender. I really could use the 90-91 if the clips are intact. Otherwise it don't matter.

PM me if you can get it. As Tiersin said, I'll give ya a bit for your troubles.
 

·
Registered
Joined
·
779 Posts
Discussion Starter · #9 ·
Juans_Mx3 said:
I need a drivers side fender
I'm assuming the 88 one?

Please, everyone. If you want a part, tell the from which rex (88-89 or 90-91). I do NOT know ANY condition of any panels. All that caught my eye were minty tail lights. The body may or may not be in good shape. I will go back, take pictures and show people. If they want the parts I will go and retrieve them. I have to go to the yard this Saturday to get me some civic parts.

Oh yes, as for the crx rear disc brakes, the car is sitting on the ground with no tires. I'm not getting them out for you.

Those with a big list, please have your wallet ready for that shipping bill, I am NOT paying for anything, I believe the matter of me pulling the part for you is a kind enough gesture as it is.

I refuse to ship (way to much hassle):

Bumpers
Dash
Big panels
Seats

I will try and ship fenders as all of them have been spoken for, but I don't know the condition. I'll keep you guys posted, if you guys can keep calling dibs on the stuff there.
 

·
Registered
Joined
·
779 Posts
Discussion Starter · #11 ·
pandaCRX said:
how about the drivers side door? :p~
You don't want a canadian CRX door...especially not one where the windows are rolled down and is allowed to have 2-4 feet of snow each winter cause it's sitting in a yard.

Plus I would never ship that :p .
 

·
Registered
Joined
·
9,746 Posts
How about the little vertical door sash things behind the window... or are they different from the US 90-91 ones with door seatbelts too? Could you take a camera when you go and get pics? I'm sure there are things everyone wants but never thinks of until they see one in a yard or being parted out.
 

·
Registered
Joined
·
2,029 Posts
If the crx corner lights fit a civic I could use the drivers side corner light off the 90-91 crx. Do you know the when you might have a chance to the yard next? Just curious because I don't want to wait three months and then find out it has been taken or is broken.
 

·
Registered
Joined
·
9,746 Posts
george34 said:
If the crx corner lights fit a civic I could use the drivers side corner light off the 90-91 crx. Do you know the when you might have a chance to the yard next? Just curious because I don't want to wait three months and then find out it has been taken or is broken.
They don't fit unfortunately.
 

·
Registered
Joined
·
779 Posts
Discussion Starter · #16 ·
Ok. So I talked it over last night with a friend and we are going 50/50 on the work.

This is what's gonna happen. This saturday I will go to the yard with a camera and take picture of all the parts asked, and take pictures of the common other parts. I will ask the yard owner for all the prices. Then I'm gonna show them here. You can either buy the part or not at that point. If you buy it, you will paypal me the money, no money, no part (too bad, I'm doing free labor, you get a good part, maybe even a hard part to find). Once I have the part and your money, I will get shipping cost. I will email you the quote, you paypal me the money, the part gets shipped. I will ship anyway you want, thru any company (duties range from company to company, remember I'm in canada, you will have to pay the duties)

I have vouches on this site, and others. I main one is CRXBart, he will vouch that I'm not here to screw anyone.

Grab your parts while you can.
 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top