Honda CRX Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
MPFI swap...Completed. Wont start. Everything has been checked 3 times over. Getting fuel injector code, I replaced all 4 injectors, replaced MAP, fuel rail, fuel pressure regulator, replaced resistor box,ECU, Dizzy, rotor,Cap,plugs,wires Still nothing. Car wants to start but is dumping to much fuel and just boggs out till it shuts off.
for the life of me , i cannot figure out what else is wrong. The wiring is done right. Checked over 3 times following schematics. If anybody knows what could possibly be the problem, reply to this. Thanks in Advance.
 

·
Premium Member
Joined
·
4,512 Posts
Damnit you beat me to it..jeff's fast typing skillz>me.. :lol:

Also what injectors are you using?
 

·
Registered
Joined
·
731 Posts
88CRxSnowBlind said:
The wiring is done right. Checked over 3 times following schematics.
That still doesn't mean it's right or wrong. If someone thinks they're doing something right although it's wrong, they can check it 3 hundred times and it'll still seem right to them. The only way for us to tell you if it's right or not is for you to tell us step by step, wire by wire, what you did. And not only that, you have to confirm that what you tell us you did is actually what was done in the car.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top