Honda CRX Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2,040 Posts
Discussion Starter · #1 ·
So I'm looking to make my own OBD0-OBD1 ecu jumper harness for my crx when once i do the mini-me swap. I have a p28. I now need to get the male ecu plugs that fit it. In my search for an OBD1 ecu plug, I need to know a couple things:

Do all OBD1 hondas use the same plug? (this would let me pull from any 92-95 honda)

If not, then which cars can i pull from?

THanks.
 

·
Registered
Joined
·
9,746 Posts
I believe they will all fit, but your best option is one from a car with a Z6 and manual tranny. That way you won't have to depin anything, and it will already have the right wires pinned in for VTEC and such.
 

·
Registered
Joined
·
6,567 Posts
i might have those ecu plugs, from a z6 del slow, Ill check when I get home from work.....also, as a side note, i have found 1 bumpe rlight so far in my piles of crap.

i also have a spare boomslang obd 0 - 1 conversion harness, if you get tired of thinking about wiring it yourself.

[email protected]
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top