Honda CRX Forum banner
1 - 20 of 397 Posts

· Registered
Joined
·
5,147 Posts
Discussion Starter · #5 ·
alright, I have some pics.

Quick run down on the car. 91 HF shell with alot of parts in it. The guy I bought it from was really cool. I drove almost 5hours each way from salem, va to virginia beach for it. I paid $250 for the shell and the parts that came with it.

The guy I bought it from was moving in a few months and had a 97-01 prelude he was working on. The car is going to be a monster. H22 turbo with 30+lbs boost is what he said he's going for. From what I saw there, I believe him.

First off, the parts that were in the car:

Misc bulbs, wheel studs etc..


97-01 prdlude wings west wing


Civic or CRX driver door glass and H22 balance shaft


Some type of harness


97-01 Prelude altizzles


Civic tailight?


Remains of an intake?


Civic half radiator


Box full of H22 engine parts, pistons etc...


97-01 fiberglass front bumper


Hyrdo tranny part i think


Misc parts, intake manifolds, starters...all kinds of stuff.


CRX dash, but its broke


97-01 prelude rim with a falken tire on it


H22 intake manifold


H22 head, with alot of it there


2 ecus


Now for the car pics!

Rear interior shot. That box is full of parts too




















I'm pretty P'O'd about this!!






And the final pic....Its good for a laugh :lol:
 

· Registered
Joined
·
453 Posts
Krix, wtf i must have been under a rock or somethin...

It looks like you've moved and own two more CR-X's since my visit.

Do you still have your blue CR-X?

I hope you plan on attending N13 this year!

And if so, why dont you meet up with us in Pa?

I'll personally help make sure you and yours make it this year!
 

· Registered
Joined
·
5,147 Posts
Discussion Starter · #8 ·
Yeah I moved on Oct 1st. Bought my first house :D

Here is the thread showing my ATTEMPT at making N12 LINK

Here is the thread showing CRX VS. Chevy Silverado. *Spoiler Alert* I lost :cry: LINK

Here is my 88si I picked up earlier this month with the insurance check LINK

So I guess you have been under a rock :lol: but its cool :wink:

I will be attending N13 in my silver si
 

· Registered
Joined
·
3,258 Posts
Everybody is getting an HF now lol...
And thats alot of parts...! :shock:
Is that a d16z6 intake in the box?

The shell looks really good...You got another steal.
 

· Registered
Joined
·
5,147 Posts
Discussion Starter · #11 ·
The intake looks like whats on my 00 civic. I havent really looked at it yet.

I dont need all those prelude parts, but they came with the car and I can sell them to negate the cost of the car. Same goes for the H22 engine parts, although they are things I could probably use one day.

Tomorrow the work starts. From looking at it today, it appears that someone was attempting to put a complete obd-1 harness in. Complete as in, stuff inside the car too. There are obd-0 and obd-1 plugs all over the place.
 

· Registered
Joined
·
5,147 Posts
Discussion Starter · #13 ·
i dont remember what kind of bumper it is. it might be a mugen knock off, but I know it didnt have any mugen badges on it. Its in decent shape, but has a few small cracks that would need to be fixed. I didnt look at it all that closely, its in my building now with the rest of the stuff
 

· Registered
Joined
·
5,147 Posts
Discussion Starter · #14 ·
Im not feeling too good today but I toughed it out long enough to work on the car for a while.

Moved the car into my building. Not alot of room to work, but I can have heat when its cold now. Although it was very warm today. T-shirt and jeans till about 4pm then it started cooling off.

Most of the wiring in the car was screwed. Cut wires all over etc.. Ive just moved it to the back for now to get it out of the way.


Rear Bumper support is in really good shape. Just some minor surface rust. I sanded the front side off and shot some primer until I can get more por-15. Ill pull it off and sand the backside later.
Before

After


With the wiring out of the way for now, I started on removing sound deadening. Ive done it before on my 91 si, and it was easy. The was even easier. A hammer and a screwdriver/ prybar is all it takes. I got most of the big pieces with just the hammer, shattering it out.
Before

After


That all I got done before I gave in to the sickness today. I also had to move my blue crx out of the building and on to my back patio. It will be easier to pull parts from there, but I dont think the wife is too happy about it :lol:
 

· Registered
Joined
·
5,147 Posts
Discussion Starter · #20 ·
Got the broken windshield removed this week. I bet my trash man LOVES me :lol:


Getting the car ready to remove the roof



Also got my XM radio in this week and hooked up in my building. Puts out good sound for the size of it.
 
1 - 20 of 397 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top