Honda CRX Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Anyone know a source for the lower radiator mount?
There are 2 that are steel outer with rubber on the inside.
The steel has rusted out pretty bad and are not salvageable.
Checked SLHonda and does not look like they are available.
If they are still available does anyone have a part number?

Thanks for any help.
 

·
Registered
Joined
·
1,962 Posts
Do you just need the mounting tabs or do you need the whole front core support? someone might have the tabs that they could ship to you. . .

I can not remember weather they bolt on or are tacked on. . ..but either way. you could easily fab up something with a piece of angle iron. that would be good or better than what was in there..
 

·
Registered
Joined
·
9,844 Posts
Matt, he needs the two oval shaped pieces with the rubber grommet the tabs on the radiator slide into, that bolts to the crossmember... it doesn't look like you are using them so they are probably attached to the CM.
 

·
Registered
Joined
·
6,567 Posts
yeah they are part of part 2, not part of the crossmember. they are welded on tabs on that bottom piece of teh rad support.

btw, i went and picked up that second box from usps. man it was huge!!!

[email protected]
 

·
Registered
Joined
·
9,844 Posts
I warned ya! lol I didn't want them to get cracked in half or scratched being some of the last good ones left :p
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #9 ·
I have the original parts, just wanted to know if anyone has a source for new parts. The original ones are pretty well rusted out.
I could try to order OEM if I had a part#, but it looks like they are no longer available.
Thanks
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #11 ·
I looked at the illistration on that site and did not find a listing for part #23.
Did a search on the part# you gave me and it comes up as a lower mount that is available for $5, so I will order and see if it is the right one.

Thanks for your help.
 

·
Registered
Joined
·
9,844 Posts
No problem... I hope its the right part

the picture that came up on Parts deals appears same as the one at SL on my end.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top