Honda CRX Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
328 Posts
For heat,the controller draws both cables in,So..
Push this valve toward the firewall:

Heater control valve:


Then position the air blend door as shown:


Located on the passenger side behind the console/radio..
 

·
Registered
Joined
·
328 Posts
Just in case I confused you.. the valve shown in the picture above is closed..
It looks like this in the opened position:


You can remove the valve from the hose completely,
and then try to blow through the core itself by appling
air pressure to either on e of the two tubes..
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top