Honda CRX Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
20,380 Posts
90crxhf_w/ZC said:
ok, you know how you have the stalk black piece holding in the stalk radio!!

use that around the steel sleeve around the aftermarket deck, bend the metal hold in pieces on the sleeve to adjust to the black trim piece tha comes stalk in the rex.

then if you have your stalk harness and the adapter to connect to the deck and the stalk harness, solder the two harneses together. heat shrink them or electrical tape the wires, and MAKE SURE no bare wires are shown.
Just a small english lesson,so as not to confuse ppl, the word is Stock, not Stalk, which is more commonly known as part of a plant or meaning to stalk someone.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top