Honda CRX Forum banner
1 - 16 of 16 Posts

·
Registered
Joined
·
132 Posts
Discussion Starter · #1 ·
Has anyone ever heard of this company, apparently this company is JDM and the cam is for a JDM D16/15 non-vtech. it's a stage 2 cam with the lobe centers moved to 109 degrees on the intake and 104 degrees on the exhaust (i may have confused these two). what's the deal with this, does anyone know?

Thanks
 

·
Registered
Joined
·
5,146 Posts
nippon racing makes alot of parts, some under different names. I dont know about there cams, but I think they make some decent stuff. My XTD clutch and flywheel is made by Nippon Racing. Its been good to me for the year Ive had it.
 

·
Registered
Joined
·
132 Posts
Discussion Starter · #6 ·
ok, all i needed was to know if anyone had ever even heard of them, I've got two good working motors for my car, and i can swap them if a part destroys one for some reason, hopefully i won't have to do that, i just wanted some opinions before i bought it and installed it,
thanks!
 

·
Registered
Joined
·
132 Posts
Discussion Starter · #8 ·
speaking of pistons, make sure they aren't going to do the opposite of what you want I.E. if you want to go 'no turbo,' make sure they aren't low-compression pistons, even if the box doesn't say that, it happened to me, making like 10-15 less horsepower because of 'oem' pistons that were actuall just low compression crap!
 

·
Registered
Joined
·
9,844 Posts
The look pretty good, but I forgot to check the sizing like you had said you seemed to notice with them. From what I can tell, the set I got is an OEM P29 set. I still need to tear down my block, get it machined, and everything before I'll really know how I like them.
 

·
Registered
Joined
·
1,050 Posts
Austincrx has not visited for some time.

USER STATISTICS
Joined:Tue Sep 19, 2006 9:27 amLast visited:Sun Jul 13, 2008 10:42 amTotal posts:83 | Search user's posts
(0.02% of all posts / 0.05 posts per day) Most active forum:Modification Garage
(54 Posts / 65.06% of user's posts)Most active topic:A6 head porting
(7 Posts / 8.43% of user's posts)
 

·
Registered
Joined
·
4,714 Posts
Seen them for years, but never seen anyone use them. I would stay away, a lot of the big companies had regrind cams go flat on them years ago before they go it down just right. Give delta cams or colt cams a call for regrind cams on the cheap. BTW "stage xxxx" means nothing!
 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top