Honda CRX Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Where in the world do i run the feed for oil for my turbo? I know its supposed to be at the oil pressure sensor at the back of the block, am i right. I have a d15a3 engine. Im really lost on this. a pic would be awsome if any one has one. Thanks guys.

:shock:
 

·
Registered
Joined
·
214 Posts
It is on the back of the block, it is 1/8 BRITISH PIPE THREAD. It is right next to the oil filter and water thermal switch (2 leads on water switch). You want to find the oil port that is next to the oil filter and the water thermal switch, it will have ONE wire on it. Don't go putting american pipe thread fittings in there, it will crack your block.

Homemadeturbo.com
 

·
Registered
Joined
·
1,959 Posts
You could also always get an adapter block for your oil filter and run a feed line from thre to the turbo and then run the return into the side of the pan...

Chris
 

·
Registered
Joined
·
214 Posts
True, and since the adapter comes with some oil filter cooler/relocation kits you could also cool your oil with a little bit of a creative layout. (B&M makes a kit, I think mine was 99 bucks)
 
1 - 4 of 4 Posts
Top