Honda CRX Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter · #1 ·
Yes I was wondering if someone could tell me if the things that I have been told about this is right. I have a pm6 ecu already and about to get a complete si intake and fuel rail and all that. I was wondering if i have to get a new wiring harness or if my stock dx one would work with it. Please let me know would greatly appreciate the input.
 

·
Registered
Joined
·
2,605 Posts
Do a search on google for "MPFI swap". It's been written up countless times.
Your stock DPFI harness won't work with the Si intake manifold, injectors, ect. You will need to adapt your harness to work with the Si hardware. You will be adding an assortment of connectors, an injector resistor box, two wires for a distributor sensor and two wires for additional fuel injectors.
 

·
Registered
Joined
·
953 Posts
What, you dont trust your own blood. For the ECU i gave you, you are going to need the Injector Resistor Box and the injectors and Two injector plugs. The rest im giving you.

Good to see you posting on here though.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top