Honda CRX Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
452 Posts
CRX90 said:
Well Life Stinks right now i started going to work about two nights ago and got fired. but that led me to my decision About my Rex. Im kepping it completly stock even with the D15.. how much will it cost to rebuild the engine or would it be cheaper to buy one off of nippon
Sorry, to hear bout the job.

Might I suggest buying a Si engine to replace your d15.
Either that or do a mpfi swap along with the Si cam. :wink:
 

·
Registered
Joined
·
452 Posts
mpfi= multi point fuel injection
1 injector per cylinder

dpfi= dual point fuel injection
2 injectors, thats it.

The Si cam is more "aggressive".
My guess would be higher lift and longer duration.
Simply put, it will make you more power (trq/hp).

Try these links for more info:

DPFI-MPFI swap information
http://honda-tech.com/zerothread?id=639552

*DX,STD (DPFI) -> Si,HX (MPFI) wiring
http://www.angelfire.com/d20/hcivic88/dx-siwiring.html

Effin Guide to MPFI Swaps
http://effinmotorworks.com/Effin_MPFI_swap.htm

I hope that helps :wink:
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top