Honda CRX Forum banner

ukdm to usdm speedometer conversion?

1242 Views 7 Replies 6 Participants Last post by  Baker
I just bought a ukdm speedo cluster for my 90 si , switched the tach,
odometer & temp/fuel gauges into my usdm cluster housing , but still not working properly yet ! I need some help , does anyone know how to wire this cluster ???? Thanx a lottt !
1 - 8 of 8 Posts
It should work. You're still using your cluster and the UKDM gauges. Make sure you clicked all the plugs back in all the way.
did you find the right way to wire ukdm cluster in the usdm crx, i cant find it i'd try to wire by shematics, but cant find usdm ones
I have the US versions for both clusters:



If you have the UK wiring, please post it! I'm getting a UKDM cluster soon and I will need the wiring for it.
See less See more
with that posted, I assume we'll see a "How To" or at least see this stickied in the "Modification, FAQ" section?
I used this link to install my UKDM cluster, and it worked perfect. It's not hard to follow the lines on the back "sheet" so I ran the door ajar warning to the Hazard light.

http://www.angelfire.com/ca/DrOhm/SiRcluster.html
baker423 said:
with that posted, I assume we'll see a "How To" or at least see this stickied in the "Modification, FAQ" section?
You mean the one that's already linked in the FAQ? ;)

I guess I'll use that link jfro posted for wiring my UK cluster, and then make it more permanent on here, angelfire doesn't get much bandwidth and isn't reliable.
downest said:
baker423 said:
with that posted, I assume we'll see a "How To" or at least see this stickied in the "Modification, FAQ" section?
You mean the one that's already linked in the FAQ? ;)
Yes, exactly like that one... :lol:
:oops: :doh:
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top