Honda CRX Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,959 Posts
check your grounds.... check to make sure that the coolant level is full and use the bleeder screw to make sure that no air is trapped in there..... and chack you eacv valve on the intake.... its on the drivers side of the intake on the dx model with a plug and coolant lines going into it. ..

Chris
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top