Honda CRX Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
2,469 Posts
Discussion Starter · #1 ·
Need to hook up my Phantom tach. On my OBD0 I hooked it to the blue wire. Do I do it to the same on OBD1? I have a B16 and dizzy from Distributor King.
 

·
Registered
Joined
·
29 Posts
downest said:
Yes, the only difference between OBD0 and OBD1 on the dizzy is the Fat White (OBD0) becomes Yellow/Green.
no obd0 tach signal wire blue coming out of the dizzy and stays blue going into the clutser plug.
 

·
Registered
Joined
·
2,469 Posts
Discussion Starter · #5 ·
downest said:
I know, I he asked if it's the same, I was pointing out the only difference between the dizzy wires for OBD0/1. It would still be the blue wire.
I was the blue wire, same color, and hooked it up and works like a charm.
 

·
Registered
Joined
·
29 Posts
downest said:
I know, I he asked if it's the same, I was pointing out the only difference between the dizzy wires for OBD0/1. It would still be the blue wire.
oh my bad miss understood your last post sorry man :oops:
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top