Honda CRX Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5,146 Posts
i did this last year. I un hooked the fuse box. you will have to extend the wires going to the starter if i remember. I removed a/c so i had more room to play with. I unplugged the wires pulled them through and hooked them back up. I extended the wires for the wiper motor too and put the map sensor under the dash.

Im taking it further now that my motor is out. Im moving the resistor box down and moved more wiring under the dash. I am going to route the clutch cable under the intake manifold if it will work.
 

·
Registered
Joined
·
5,146 Posts
If you have to extend a wire do it ONE wire at a time. Cut, solder, heatshrink.
I have a prelude body harness, same colored wires as my crx so Ill be cutting it up to extend more wires to get everything where I want it.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top